Jump to content
Yamaha Tenere 700 Forum
ChristosGR

Tenere 700 Exhaust options and pictures.

Recommended Posts

MGG

I am in Canada so I do not plan buying an exhaust until I can properly ride the T7. A lot of people tell that the original sound is pretty good, but I am more worried about weight since I need to add racks so every kilogram counts. 

I also am waiting for CamelADV to make a tail fuel tank available, that might influence the exhaust and racks.

If I would have to choose one today I would probably take the HPcorse same as video. That dual tip is nice, I would just hate to scratch all that nice carbon fibre. 

 

In reality there are 2 situations where the sound of the exhaust needs to be pleasant: 1- at the stop light it needs to be low and rich to give goosebumps and 2- at the normal highway speed 110kph/65mph so it's not annoyingly high pitched. 

I also need the exhaust to be sturdy enough so it does't bend or break at the first tip-over.

The connections of exhaust, piping and cat needs to be soldered or with proper clamps. I will not buy any spring attached exhaust, that's for shows. So the Remus exhaust is off the list for now.

I would also love a higher exhaust with a heat shield so that soft-bags can go over them without problem.

Edited by MGG
Typo
  • Like 1

Share this post


Link to post
Share on other sites
ADVUSA

Sir Adrian,  offers an OEM,  'free sound update.'

 

:classic_biggrin:  🏆  🏅 

 

Edited by ADVUSA

Share this post


Link to post
Share on other sites
denis700

Someone said 200€ exhausts are impossible, but they are not. Seem well made to. Only problem..not E approved, so not my choice.

https://dominator.pl/en_BE/p/Tenere-700-Exhaust-Silencer-Carbon-Tip-HP1-2019-2020/2114

 

I'll go for the X-racing, 300+€ with shipping, E-approved, many options available through manufacturer communication, headers also available. (x-racing page till now not yet updated for the T7)

https://www.facebook.com/PietrikssonBlogger/videos/638953759974995/

 

Edited by denis700
  • Like 1

Share this post


Link to post
Share on other sites
Aleksandar13
14 minutes ago, denis700 said:

Someone said 200€ exhausts are impossible, but they are not. Seem well made to. Only problem..not E approved, so not my choice.

https://dominator.pl/en_BE/p/Tenere-700-Exhaust-Silencer-Carbon-Tip-HP1-2019-2020/2114

 

I'll go for the X-racing, 300+€ with shipping, E-approved, many options available through manufacturer communication, headers also available. (x-racing page till now not yet updated for the T7)

https://www.facebook.com/PietrikssonBlogger/videos/638953759974995/

 

Thank you for sharing... I would like an exhaust that I can ride in Europe as well and not be forced to swap to stock one on trips... X race seems nice and could be an option.... At the moment my thoughts are with lextek. 

Share this post


Link to post
Share on other sites
Bad Pritt

So any word on the Lextek ones?

Share this post


Link to post
Share on other sites
JamesE
17 hours ago, Bad Pritt said:

So any word on the Lextek ones?

Emailed them this morning. Apparently they're still a couple of months off selling the link pipes. You could always do what @Wilcollinsphotos has done - buy the Lextek end can and get someone else to make a link pipe. Or just wait.

It's a good can. Should be getting the full system fitted on mine soon along with dyno testing.

  • Like 1
  • Thanks 1

9to5adv.com

Share this post


Link to post
Share on other sites
Thomas Bak

Hello everybody.I fitted an akrapovic can from a tdm 900 it looks sounds and works perfect,the shop I went to do the job already had a link pipe from a tdm 900 so it was pretty easy I would say.It cost me only 250€!!!!they made just few adjustments on the link pipe and the can was from a crashed tdm 900 thats why the price was so low...the thing is you dont have to spend lots of money for a decent can...cheers

IMG_20200111_170800.jpg

IMG_20191124_121843.jpg

  • Like 5
  • Thanks 1

Share this post


Link to post
Share on other sites
Aleksandar13
On 1/13/2020 at 3:11 PM, JamesE said:

Emailed them this morning. Apparently they're still a couple of months off selling the link pipes. You could always do what @Wilcollinsphotos has done - buy the Lextek end can and get someone else to make a link pipe. Or just wait.

It's a good can. Should be getting the full system fitted on mine soon along with dyno testing.

Would you know what link pipe works the best for the lextek end can.. Is it tracer 700 or mt07...? 

Would really appreciate some information if Lextek decides to wait another 2 months 🤔

Share this post


Link to post
Share on other sites
Lupan

image.thumb.png.88330fab27bfef84aa3ed6ef1468736e.png

Look at this price... It´s a lot... If it was the 410 €...

And i´ve seen this one also is the second line of mivv, what do you think?

image.thumb.png.3e84f76c887a9bd9d23c9de4da224abc.png

 

Edited by Lupan
  • Like 1

Share this post


Link to post
Share on other sites
Aleksandar13

Back to this one... For the price don't think there is  nothing out there that can touch it... Very light and small as well.. Might be the way forward... I'm not sure yet.. But would think about black matt paint instead of mirror stainless.. What you guys think of the small exhaust..? 

Screenshot_20200122-203358.jpg

Screenshot_20200122-203725.jpg

Share this post


Link to post
Share on other sites
MGG

I think the exhaust needs to "look normal" ... because there are some regulations that limits the actual changes (noise) we are allowed based on location. I would not choose a small one since I am bound to be stopped more often by the police. And I also suspect that a smaller one will also be louder ... 

The look and noise is one thing ... the other is how well it will resist tip-overs and crashes. If it bends on the first parking lot drop then there is no point in having it. 

I think that a black one could be much better than the shiny one.

 

And if it's that small it might as well be hidden, placed closer to the seat/frame and a bit more forward so that we have a cleaner back end allowing more weight on the tail section.

  • Like 3

Share this post


Link to post
Share on other sites
Aleksandar13

<p style="text-align: center;"><img src="/../_webedit/shop-images/1836-1.jpg" alt="Yamaha Tenere 700 2019 Onwards"...

 

This is interesting.... But they have so many options.. Headache already hahaha 🤓😵😂😂

Share this post


Link to post
Share on other sites
Bad Pritt

MIVV Oval exhaust slip-on in titanium homologated for Yamaha Tenere 700 2019 , Y.064.L4C, Silencers exhaust, Exhausts & Silencers, by Mivv, MIVV Oval cod. Y.064.L4C  A HIGH-PERFORMANCE EXHAUST The MIVV OVAL exhaust has been...

Good price i guess?

 

Share this post


Link to post
Share on other sites
Lupan

Probably thats going to be my choice, and from that shop shipping is free also and if u want to buy other thing with the exhaust its free shipping also...

But it's going to be the first time i have a mivv exhaust, don't know if it's like termignoni or akrapovic in quality or sound...

Share this post


Link to post
Share on other sites
MGG

This will probably give an idea of the sound ... 

 

🙂 

  • Like 1

Share this post


Link to post
Share on other sites
Lupan

But on vídeo we have the sound of the T7, my question is to the mates who knwos already the brand and the titan exhaust quality and live sound...

The storm exhaust is only 199 €

Anybody knows?

 

Edited by Lupan
  • Like 1

Share this post


Link to post
Share on other sites
MGG

🤣... a cheap option with a AliExpress (38$US) ... you get what you pay for ... the Chinese steel is much cheaper and thinner than what quality requires.

 

 

... I bet that Akra sticker will fade and burn out in a few weeks.

... also seems to have some finish issues ... but I guess it would be an easy project to install it up high ???

Edited by MGG
added info

Share this post


Link to post
Share on other sites
Aleksandar13
5 hours ago, MGG said:

🤣... a cheap option with a AliExpress (38$US) ... you get what you pay for ... the Chinese steel is much cheaper and thinner than what quality requires.

 

 

... I bet that Akra sticker will fade and burn out in a few weeks.

... also seems to have some finish issues ... but I guess it would be an easy project to install it up high ???

Does it come with link pipe? Or is it just the end can included in this price? 

Share this post


Link to post
Share on other sites
MGG
On 2/8/2020 at 4:00 AM, Aleksandar13 said:

Does it come with link pipe? Or is it just the end can included in this price? 

Really?... Is that your concern?... See link... I do not see link pipe... 

If you think you will have everything for low cost, maybe you should consider quality and long term use... Everything is out there, doesn't mean that all is worth while.

Good luck.

Share this post


Link to post
Share on other sites
Aleksandar13
Just now, MGG said:

Really?... Is that your concern?... See link... I do not see link pipe... 

If you think you will have everything for low cost, maybe you should consider quality and long term use... Everything is out there, doesn't mean that all is worth while.

Good luck.

I was only trying to find out if there is an alternative to a link pipe so that I can get the end can I want. 

I'm not ready to go ahead and spend 700 on an exhaust. Thank you for pointing out there isn't a link pipe for sale. 

Considering the comment you made you already knew my intention 😉😂

 

Share this post


Link to post
Share on other sites
Colddog

This is what I'm thinking about for a high pipe on the T7. 

I may have to build it if no success finding the live photoshop product!

1991589605_highpipe700.jpg.1e060c403665c48a4885a77942064596.jpg

  • Like 2

Share this post


Link to post
Share on other sites
denis700

I went for the cheapest, but E-approved unit, dominator is not e-approved.

So came up with this, have yet to mount and test it, but there are some videos of it on YT, search Niccolo Pietribiasi.

 

IMG_20200211_173103~2.jpg

  • Like 2

Share this post


Link to post
Share on other sites
TimmyTheHog
3 hours ago, Colddog said:

This is what I'm thinking about for a high pipe on the T7. 

I may have to build it if no success finding the live photoshop product!

1991589605_highpipe700.jpg.1e060c403665c48a4885a77942064596.jpg

Will look forward to see what you got.

 

Except all the high routing pipe I have seen are all so bulky around the calf area...

 

just look at the Scram 1200 from triumph...

 

So if you got a way to route the pipe thru there without making it a huge bulk, that would be the money shot.

  • Like 2

Share this post


Link to post
Share on other sites
Colddog

Once i get me mitts on her, there will be some educated decisions to be made, but for now I'm dreaming as we wont see it for a while yet in Canuckestan.  What i'm finding are photoshop renderings, nothing concrete yet, but I have sourced out a pipe building kit thru cone engineering!

 

  • Like 1

Share this post


Link to post
Share on other sites
tenerecanada

HP Corse sounding meaty

 

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Our Friends

Tenere across the USA

Tenere 700 Forum. We are just Tenere 700 owners and fans

Tenere700.net is not affiliated with Yamaha Motor Co. and any opinions expressed on this website are solely those of ea individual author and do not represent Yamaha Motor Co. or Tenere700.net .

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.