Jump to content
Yamaha Tenere 700 Forum

Mod #1 Huzar exhaust


Guys
 Share

Recommended Posts

Order placed with the Huzar guys with a prompt response, communication and arrived safely and well packaged within 8 days to Glasgow, Scotland. 
 

Really straight forward to install, having to cut a hole into a brand new bike to accommodate the small bracket seemed wrong, but just psychological. I was initially concerned about how close the pipe was to the plastic rear, literally just missing it, but thankfully it hasn’t affected the plastic at all. 
 

I’m really pleased with the line of the pipe and the sound is kinda growly but I like it. 
 

There is a tiny wee leak at the connection but an easy fix with a sealant. 
 

Overall very impressed with the service and quality from the Huzar folk, they responded to a couple of queries after I fitted it so absolutely no complaints from me. 
 

Onto mod#2 

D59927E6-F5F8-4057-97AE-450EF9DC108D.jpeg

331FCA10-FD74-495E-B2B8-68E631201B74.jpeg

EF270F3D-58E0-4039-BD88-123EAF9DC34A.jpeg

BC3A62E6-82A1-449C-9A3C-5ECECD800C67.jpeg

9D946AE1-CA17-4FD3-8D19-420DEEC67C65.jpeg

9A85697F-B20C-4D3E-A185-5E3FCB6F3EC2.jpeg

E3AEFBE8-33FD-4B6A-BA73-4BDB9AF5C5AE.jpeg

2B887E60-6B36-4A27-898C-6737E230F8AE.jpeg

269F09C4-D78C-4B71-B7D0-45D6F4DFB080.jpeg

Edited by Guys
  • Like 1
Link to comment
Share on other sites

That's super high and tight. Mine is leaving Poland en route to Colorado today. Not that I drop the bike a lot, but I push my abilities all the time and the swing arm is getting quite scuffed and I'm sometimes more tired from kicking the silencer back into place than from riding and I'm really looking forward to getting this mounted. 

  • Like 1
Link to comment
Share on other sites

7 days Poland to Colorado. I can't get a lot of domestic parts that fast.

 

poland.jpg

  • Like 3
Link to comment
Share on other sites

Only issue I had was a small leak where it meets the headpipe. A little high temp rtv fixed it. Still not too fond of the rear mount but I’ll leave it for now unless it becomes an issue then I’ll fab up something more substantial. 

Edited by mpatch
  • Like 1
Link to comment
Share on other sites

That does the job and solves the issue... but they could work a bit more on how it looks, really.. 😄

Edited by Ziggy
  • Like 1
Link to comment
Share on other sites

On 7/28/2021 at 8:37 AM, Ziggy said:

That does the job and solves the issue... but they could work a bit more on how it looks, really.. 😄

For the price range I think it’s pretty damn good. 

Link to comment
Share on other sites

On 7/27/2021 at 11:09 PM, CimarronEric said:

7 days Poland to Colorado. I can't get a lot of domestic parts that fast.

 

poland.jpg

Nice one, did you go for black or chrome? 

Link to comment
Share on other sites

11 minutes ago, Guys said:

Nice one, did you go for black or chrome? 

 

Black

huzar.jpg

  • Like 2
Link to comment
Share on other sites

Nice man! I just ordered mine. Probably gonna see if I can sell the muffler it comes with and just use my own. Also want to look into mounting it possibly a different way (more sturdy) too.

 

In all honesty, after a lot of research, this is probably the cheapest midpipe I can find short of paying someone else to weld a custom midpipe. For $200, I think I'm hard-pressed to find something cheaper.

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...
On 7/28/2021 at 3:37 AM, Ziggy said:

That does the job and solves the issue... but they could work a bit more on how it looks, really.. 😄

If you shortened the can just enough to get the tip closer to the end of the tail it would help overall looks a fair bit. 

 

Link to comment
Share on other sites

Can just get some rally raid or adventure spec racks and you won’t even see it 😀B52BBCC1-B2AF-4E33-8AAD-AB124360282D.thumb.jpeg.768a2e9367828ebc924385709e1c7a17.jpeg

  • Like 3
Link to comment
Share on other sites

Mine just arrived today, but I can't find any installation instructions. Where did you guys find them?

Link to comment
Share on other sites

1 hour ago, Cougar Bait said:

Mine just arrived today, but I can't find any installation instructions. Where did you guys find them?

There are none.  Look on the website for the pictures.  This is where Huzar does actually fail.  They expect you to figure out how to install it.  The only thing that really needs explanation is where to cut the opening for the mounting tab.  Use the pictures.

 

You;ll get a round disc with holes cut in it.  THat is the internal dB killer that goes in between the end can and the midpipe.  The outer dB killer attaches with a socket head cap screw and nylok nut.  There is a ring with welded nut on it to attach the midpipe/end can joint to the OEM exhaust hanger.  I found the supplied screw a little too long...it bottoms out on the pipe before tightening fully to the mount.

 

tlumik-owalny-50-cm-ze-stali-nierdzewnej

Tłumik owalny 50 cm, w całości wykonany ze stali nierdzewnej malowany proszkowo na czarno. Aby możliwe było zamontowanie wydechu górą, konieczne jest wycięcie otworu w elemencie plastikowym o wymiarach 30x20...

 

 

Link to comment
Share on other sites

Shortly after posting, I found the pictures and got it all installed. I noticed the mid pipe won't fit on the gasket off of the cat... Is it supposed to just be clamped down to the header pipe as is? Because that's exactly what I did, lol. Haven't checked for leaks yet, and not too sure exactly how to do that, but oh well. Might take it off and put some high-temp gasket seal stuff on there.

Link to comment
Share on other sites

1 hour ago, Cougar Bait said:

Shortly after posting, I found the pictures and got it all installed. I noticed the mid pipe won't fit on the gasket off of the cat... Is it supposed to just be clamped down to the header pipe as is? Because that's exactly what I did, lol. Haven't checked for leaks yet, and not too sure exactly how to do that, but oh well. Might take it off and put some high-temp gasket seal stuff on there.

Yes.  That's how it's fitted.  I found I needed to retignten after a few thousand miles.  You'll know if it leaks, it'll dribble black sooty moisture.  SOme have put high temp exhaust sealant on to fit it a little more snug.

 

J

Link to comment
Share on other sites

  • 2 weeks later...

I was wondering if you ordered the long mid pipe and the long muffler together, can you just cut the mid pipe to the length you’d like? I inquired to the Australian company that made the very nice pipe with the Black Widow muffler, asking for just the mid pipe. They said they’d be happy to sell me the mid pipe for $450 Australian ($326 American) plus shipping., and that made me swallow hard.

Link to comment
Share on other sites

  • 2 weeks later...

Has anyone fitted a spark arrestor to the Huzar exhaust? I'm lookin at installing the dominator catless headers and a 2WDW ecu reflash in the spring, but I'm currently relying on the cats to act as a spark arrestor.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

Our Friends

Tenere across the USA

Tenere 700 Forum. We are just Tenere 700 owners and fans

Tenere700.net is not affiliated with Yamaha Motor Co and any opinions expressed on this website are solely those of ea individual author and do not represent Yamaha Motor Co or Tenere700.net .

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.