HP Corse Exhaust & Tail Tidy

[Leoh]

Hello All,

I have a Tusk tail tidy with LED lights and considering the HP Corse high mount exhaust. Do any of you have this exact combination installed? The question lies if the exhaust position will clear the right turn signal as found on the Tusk tail tidy? There are photos online of tail tidy's clearing the HP Corse high mount exhaust with no modification or minimal modification to the right turn signal position. But I cannot confirm which tail tidy brand they are using.

 

Thank you in advance for your response.

Leo

[AZJW]

@Leoh An approved vendor here on the forum that sells the HP Corse exhaust is @BellissiMoto.  Hopefully Paul will have some details on this for you.

[BellissiMoto]

Hey guys!

 

Sorry for late reply.  It's been CRAZY at the shop lately and I haven't got on the forums too much.

 

As far as that combo of parts, I can't say for sure.  We've sold like 50 of these and only one person has called me to give me feedback on the turn signal saga.

 

This particular customer used the Yoshimura Fender Eliminator with their additional brackets and small LED's, and he told me it'll work it you mount the turn signals in either position, which is on the two upper bolts of the license plate bracket OR the two lower ones.

 

Some of you on here may know I'm building a Tenere 700 myself, and I'm going about it a little different.  Due to other things at play, I'm not able to get to this project until the fall, but when I do I hope to have a very nice clean solution to this issue.  I'm making it for myself, but if all goes well, I'm going to ask one of our vendors to produce it.

 

I'll keep you posted on it, but at the moment I'm just not sure on the Tusk Tail Tidy turn signal location, as I've never seen it in person.

 

Kind Regards,

- Paul

[esbyy]

Did you end up buying the hp corse and running the tusk tail tidy? How did they fit together?

[BellissiMoto]

I ended up following through with my original design.  Full Arrow Ti system high mount with custom Ti pipe from Comp Werkes...

 

Haven't got around to my tail tidy solution/integrated tail light just yet.

 

https://www.instagram.com/p/CbyhftGLKOU/

[Toymaster]

On 2/17/2023 at 1:03 PM, esbyy said:

Did you end up buying the hp corse and running the tusk tail tidy? How did they fit together?

 

That is the combo I have, below is a thread with pics.  Bent the light mounting tab a little and have plenty of clearance.

 

 

[Cirus]

I've got that exact combo on my '22. It works just fine. The exhaust comes with some extra spacers so I added these to the mounting bracket to give the right signal a little more clearance.