Jump to content
Yamaha Tenere 700 Forum
Fabros

Auxiliary lights - what to choose?

Recommended Posts

Fabros

Hi guys,

 

I´m planning and buying all kinds of accessories for the Tenere these days. But now I wonder what kind of lights people here are running? 

In the past I have always used the stock BMW fog lights, since they came pre-installed on the bikes. But now I am looking for some high output auxiliary lightning for those dark forest trips. 

 

What do you recommend? Denali, Clearwater, PIAA?

 

image.png.6558003df7f8b770cd7362d48dbf4c45.png

 

Fabros

Share this post


Link to post
Share on other sites
norcal616

360° of light coverage ?

GENPLT240-STD.jpg

  • Haha 2

2012-WR250F...2015-FZ-07(Hordpower edition 80whp)...2015- FJ-09 Graves Exhaust Woolich Tune/Kit 120whp

Share this post


Link to post
Share on other sites
Fabros
2 hours ago, Cruizin said:

I'm actually a big fan of Cyclops adventure motorsports https://www.cyclopsadventuresports.com/

They are big-time adventure riders and really good people.  I turn to them for all of my lighting needs. 

 

They really do look good! 

Definitely on my list for now. Have you tried some of them yourself?

 

Fabros 

Share this post


Link to post
Share on other sites
TavisB

I do the cheap Chinese LEDs so that I don't get sad when I smash them. 

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites
Cruizin
3 hours ago, Fabros said:

They really do look good! 

Definitely on my list for now. Have you tried some of them yourself?

 

Fabros 

Yes, and also their tire monitoring system as well.  I know the owners personally and they are a Vendor on our MT-07 forum.   They race with what they sell, their stuff is race tested. 

  • Thanks 1

Share this post


Link to post
Share on other sites
PNWTEN
23 hours ago, Cruizin said:

I'm actually a big fan of Cyclops adventure motorsports https://www.cyclopsadventuresports.com/

They are big-time adventure riders and really good people.  I turn to them for all of my lighting needs. 

 

I can’t rave enough about Darryl and his crew at Cyclops lights! His level of customer service and support of the Tenere community has always been first rate! 

45ED01AC-43D6-4E84-9DD4-24D94C410C0C.jpeg

10B30788-E7B1-4840-AF82-BFA84BC1E3D6.jpeg

  • Like 1

Share this post


Link to post
Share on other sites
mjh937

I have a Cyclops LED bulb in my headlight which I love.  I should add their aux lights for better visibility to other drivers.  I think that will go on my Christmas list. 

Share this post


Link to post
Share on other sites
Johax

what you think about this?

 


Caratteristiche speciali:<br>- Certificazione come abbagliante e compatibilità elettromagnetica<br>- Omologazione ECE R112 e R10<br>- Portata: 377 m (0,25 Lx)<br>- Numero di riferimento: 12.5<br>- antiurto e impermeabile<br>- Schermatura UV<br>- rivestime

 

 

Share this post


Link to post
Share on other sites
NickT7

Yesterday I installed these LED lights from the brand interphone.  And am amazed at the amount of light they give.  I used the original yamaha fog lamp brackets for this.

 

Nick

IMG_20200406_173100.jpg

  • Like 3

Share this post


Link to post
Share on other sites
Duncan666
2 hours ago, NickT7 said:

Yesterday I installed these LED lights from the brand interphone.  And am amazed at the amount of light they give.  I used the original yamaha fog lamp brackets for this.

 

Nick

IMG_20200406_173100.jpg

Those look great. Out of interest did you use the switch or did you bypass that? How did you wire them in, via the accessory cable on the T7 or direct? I see that they come with a loom that looks promising as a plug and play with the T7 plug? Curious to hear the details. Thanks. 

  • Like 1

Share this post


Link to post
Share on other sites
NickT7

I connected the lamps to the accessories plug under the right side panel.  I used original yamaha connectors there.  The installation is very simple.

 

Nick

IMG_20200410_150606.jpg

  • Like 1

Share this post


Link to post
Share on other sites
Duncan666

Very neat. That’s a good option for me. 

Share this post


Link to post
Share on other sites
Stephen H

Hi I went with Denali S4 with the high low switch. After reading somewhere on the world wide web about a guy frying his Ecu I decided to let the local garage do the install . They did a really good (expensive) job of them and they are all I was wanting. In the daylight people see you which is one of the things that was really important to me. When the sun goes down these things are superb and ive not had lights that good before. Ive had very few chances to try them on a trail in the dark but I know they will light everything up perfectly.

My old Tenere 1200 had a bank of 4 Oem lights across the front and they were nothing compared to these. 

I have a spare set of Denali S4 sat here and I'm wondering whether to install them as well.

Cheers Steve

IMG_0704.JPG

  • Like 3

Share this post


Link to post
Share on other sites
sebti

I have mounted vision X LEDs , model: dura mini combo.

the video is in french, but in it you can some viedos between original, chinese led and vision X...

 


Find "mobylette rollers" on social medias ! 🙂

Share this post


Link to post
Share on other sites
FAR&FURTHER

I'm big fan of the ADVMonster - http://stores.advmonster.com

 

I used their Model 30 for good 60k km on my Honda CB500x, crashed them, broke the glass, got water in them because of that, still survived! I only manage to break them after I crashed them 2nd time (after about 4 years).

 

So, for T7 I went with Model 55 which is combined flood light + 7 degree spot, with the dimmer and high beam override. They put out a lot of light, the flood is great and when they're at max + high beam it's very comfortable to travel at night.

 

They're also good fit because they use max 2.1A each much reduced with the dimmer which means the lights + grips will fit into the 10A fuse rating for the Accessories circuit.

 

More info will be in accessory video coming soon.

 

Big problem is the high beam override does not work for Tenere 700 due to electronics of the T7 headlight! But this is not issue of the lights but the Dimmer/High beam switch.

 

Pavel


RTW Ténéré 700, UK to India & back on Honda CB500X

farandfurther.org | YouTube | Instagram

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Our Friends

Tenere across the USA

We are just Tenere 700 owners and fans

Tenere700.net is not affiliated with Yamaha Motor Co. and any opinions expressed on this website are solely those of ea individual author and do not represent Yamaha Motor Co. or Tenere700.net .

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.