Jump to content
Yamaha Tenere 700 Forum
  • 0
Motoadventure

Electrical Question and pictures of Fuzebolck

Question

Motoadventure

Electrical Stuff Fitted a Fuzeblock to the T7  as the Denali power hub 2, I removed  it from my GS fell apart after 3 trips round Europe in 18 months. I purchased last week and it look a lot better than the Denali.

I can now wire the heated grips sat-nav and other items and hope it lasts a bit longer this time.

 

Does anyone have any recommended USB plugs? As most I have seen look a bit poor in the quality department   

  

IMG_5527.jpg

IMG_5530.jpg

Edited by Motoadventureman (Mick)

Share this post


Link to post
Share on other sites

11 answers to this question

Recommended Posts

  • 0
cabby

What fell apart, your GS or the fuzeblock ? 

Share this post


Link to post
Share on other sites
  • 0
Motoadventure
15 hours ago, cabby said:

What fell apart, your GS or the fuzeblock ? 

Hi the Fuzeblock is new i replaced it for a Denali power-hub 11 this lasted 18 months the soldering gave way on the battery terminals and wire fell off when moving it to the T7. the Denali looks a very poor quality item and is heading for the wheely bin. The Fuzeblock looks a much sturdier construction so I hope it lasts a bit longer. Cheers Mick    

Share this post


Link to post
Share on other sites
  • 0
cabby

So these fuzeblocks, do you just connect to battery and then run your accessories to the fuzeblock ? Which I presume will be fused and switched feed ?  

Share this post


Link to post
Share on other sites
  • 0
X Plane
Posted (edited)
  • Like 1

Share this post


Link to post
Share on other sites
  • 0
Motoadventure
5 hours ago, cabby said:

So these fuzeblocks, do you just connect to battery and then run your accessories to the fuzeblock ? Which I presume will be fused and switched feed ?  

Yes red and black to the battery, yellow to the blue wire in the tail light with a jointer  provided, then wire up your electrics. 

Fuses inside on one side give you power when the engine is running the other side constant power. Red  cable and yellow have also got the inline fuses already fitted to them if you buy the wiring kit. Cheers Mick 

Share this post


Link to post
Share on other sites
  • 0
ADVUSA

Nice work Mick.  I learned my lesson with this on my KTM 690 with all wires going to the battery.

 

✌️

 

 

Share this post


Link to post
Share on other sites
  • 0
Motoadventure

Hi ADVUSA following my trip the Fuzeblock worked fantastically. unfortunatly I instlled it above a couple of small fuze boxes so will be moving it under the passenger seat as soon as I have a  bit of spare time.  

 

Cheers Mick 

  • Thanks 1

Share this post


Link to post
Share on other sites
  • 0
cabby

Can these fuzeblocks be bought in the UK as they're site seems to be US. 

  • Like 1

Share this post


Link to post
Share on other sites
  • 0
Motoadventure

Yes via Nippy Normans website

 

Thanks Mick 

  • Like 1

Share this post


Link to post
Share on other sites
  • 0
cabby

Does a wiring harness need to be bought also ? 

Share this post


Link to post
Share on other sites
  • 0
Motoadventure

Hi not necessarily  I did but it’s only 3 wires with a an inline fuse it the red wire. Cheers Mick 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.