Accessories power

[Simon Jackson]

Hi all. I have no voltage going to any of my accessories eg the two 3 pin blanked off plugs and the power outlet on the dash. Bike runs and starts as it should and all fuses are working. I noticed the problem when my sat nav failed to power up. The sat nav is working fine on my other bike. Any ideas??

[Alan M]

When you say all fuses are working, how did you check them? 
 

With fuses they normally fail two ways, fast blow - short circuit/high current and slow blow - prolonged overload/low current but above fuse rating.

 

With a slow blown fuse it’s better to check with a multimeter as the fuse can still visually look intact.

 

Sorry if I’m teaching you how to suck eggs

[Simon Jackson]

Hi Alan. Thanks for your reply, all fuses have been checked with a multimeter. I’m currently cleaning all contacts in plugs, some have definitely got wet so hopefully I’m just suffering a bad contact somewhere. 

[Simon Jackson]

Hi all. I've cleaned out all plugs and fuses I can find with contact cleaner and  now everything works as it should. I did find water ingress is some places. So maybe I've been over zealous  with with  the jet wash but personally I don't think so.