Jump to content
Yamaha Tenere 700 Forum

2023 Tenere Accessories


maddog123

Recommended Posts

I just purchase a 2023 Tenere and currently looking for accessories, and most accessories are listed as for the years 2021 -2022 would these parts fit on my 2023 ? I looked online and it seem like there is not much differences between 2022 and 2023. 

Link to comment
Share on other sites

I bought a 2023 late this summer and am pretty deep into farkling. So far, accessories that have not specified "fits 2023" but are for earlier T7s have all been compatible. 

  • Thanks 1

Tusk crash bars/pannier & top racks/hardcases/footpad/Olympus tank bag, Camel ADV One-finger clutch kit, Rox risers, fleabay tail tidy, Delkevic full exhaust w/ 14" carbon oval can

Link to comment
Share on other sites

A US/Canada 2023 T7 is the '22 EU model. This means it's an Euro5 version - as @Redneckj said, mostly the aftermarket skids are different than for previous Euro4 models, the same is true if your gonna do any kind of ECU tuning. Everything else will fit perfectly.

 

FYI, the TFT dash models (T7 World Raid and all European/Japanese/Australian? 2023 and newer models) seem to differ a bit more. Recently learned these have slightly different batteries for example (dunno why), support quickshifters more easily, and so on.

  • Like 1
Link to comment
Share on other sites

So far I've had my Tenera for a two weeks ish, I got the engine guard installed when purchased, now I just ordered the rear rack, chain guide, Yoshimura  exhaust, throttle lock and tank pads. It will be it for this year I think... next year I will do skid plate, tires, water pump guard, K&N air filter, easy soft clutch arm extender and front lights cover.  what else should I consider?        

 

image.png.3963add8b2a052f65e9ed9e480d7d75e.png

 

 

That's the rear rack I chose.  

image.png.6a17a8a2279b20a72852b6ac65fcb793.png

 

 

Edited by maddog123
  • Like 1
Link to comment
Share on other sites

just got and installed my yoshimura exhaust and what a difference … lots more pep and very nice sound very impress.

IMG_2842.jpeg

 

The Dyno graph 

 

image.png.16214c5f13332020da9b8187dd5cb29d.png

 

 

 

image.png

Edited by maddog123
  • Like 1
Link to comment
Share on other sites

  • 3 months later...

what air filter you guys would recommend ?  

 

is this one a good fit for performance and good filtration ?  should I add the pre filter ? 

 

 

Edited by maddog123
Link to comment
Share on other sites

On 10/19/2023 at 5:18 AM, maddog123 said:

So far I've had my Tenera for a two weeks ish, I got the engine guard installed when purchased, now I just ordered the rear rack, chain guide, Yoshimura  exhaust, cruse control and tank pads. It will be it for this year I think... next year I will do skid plate, tires, water pump guard, K&N air filter, easy soft clutch arm extender and front lights cover.  what else should I consider?        

 

image.png.3963add8b2a052f65e9ed9e480d7d75e.png

 

 

That's the rear rack I chose.  

image.png.6a17a8a2279b20a72852b6ac65fcb793.png

 

 

What cruise control did you choose? 

Link to comment
Share on other sites

31 minutes ago, roygilbo said:

What cruise control did you choose? 

it's actually a throttle lock  I will edit it 

  • Like 1
Link to comment
Share on other sites

10 hours ago, maddog123 said:

what air filter you guys would recommend ?  

 

is this one a good fit for performance and good filtration ?  should I add the pre filter ? 

 

 

 

They are a great foam air filter.

I have one and the prefilter.

The real price is here 


Yamaha XTZ 690 T7 Tenere 2020 - On

 

 

I also have this  which I find superior. I have the airbox lid prefilter instead of the snorkel filter.

The (edit) airbox lid filter is so convenient to remove and clean.

I did a very dusty 880km on the weekend and haven't done the filters yet.

I will photograph and show you how good they are ( later today Oz time )

 

 

Edited by Rider 101
  • Thanks 1

Alcohol! No good story starts with a salad.

Link to comment
Share on other sites

Airbox prefilter after 880km of sweeping for 4 other bikes and main filter.

I do smear a little grease where the prefilter sits on the airbox lid.

 

 

DSC02890.JPG

DSC02892.JPG

Edited by Rider 101
  • Like 2

Alcohol! No good story starts with a salad.

Link to comment
Share on other sites

  • 1 month later...
On 10/17/2023 at 11:31 AM, 406T7 said:

I bought a 2023 late this summer and am pretty deep into farkling. So far, accessories that have not specified "fits 2023" but are for earlier T7s have all been compatible. 

This has been my buddy’s experience as well.

Link to comment
Share on other sites

I just purchased a 2024 T7 and the accesories I’ve added out of the box if you will are

Outex tubeless kit

TPMS monitor

endurance grip heaters 

seat heater

H&B lower engine Guard

on order set to arrive are

SRC rear rack

motology films TFTdisplay/phone stabilizer

 

 

Link to comment
Share on other sites

6 minutes ago, racer162 said:

I just purchased a 2024 T7 and the accesories I’ve added out of the box if you will are

Outex tubeless kit

TPMS monitor

endurance grip heaters 

seat heater

H&B lower engine Guard

on order set to arrive are

SRC rear rack

motology films TFTdisplay/phone stabilizer

 

 

Welcome to the club!

I bet you are the first one to install a seat heater onto a T7...

Link to comment
Share on other sites

I ride all year. I have one I use on my Duc and my Serow just a life saver.

 

  • Like 1
Link to comment
Share on other sites

39 minutes ago, racer162 said:

I ride all year. I have one I use on my Duc and my Serow just a life saver.

 

In the North of Japan definitely, from what I can tell! I'm happy with heated gloves in Western Germany, we hardly reach 0° C over here.

Link to comment
Share on other sites

I thought about heated gloves but went with the heated grips. Have them on my other bikes. Warm fingers rock. 

Link to comment
Share on other sites

5 hours ago, racer162 said:

I just purchased a 2024 T7 and the accesories I’ve added out of the box if you will are

Outex tubeless kit

TPMS monitor

endurance grip heaters 

seat heater

H&B lower engine Guard

on order set to arrive are

SRC rear rack

motology films TFTdisplay/phone stabilizer

 

 

May I ask, which TPMS monitor did you install?  And where did you get it from?  Thanks. 

Link to comment
Share on other sites

Absoutly, thanks for asking.

1st I bought them off of Amazon.

the 1st one I bought was by ORBST but it arrived missing parts but it was  sub ¥9,000 or $90.

the second one which works fine was 

¥2700 about $25 but no name I could find.

and is in the link below.

hoe it helps 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Our Friends

Tenere across the USA

Tenere 700 Forum. We are just Tenere 700 owners and fans

Tenere700.net is not affiliated with Yamaha Motor Co and any opinions expressed on this website are solely those of ea individual author and do not represent Yamaha Motor Co or Tenere700.net .

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.