Turnlight indicator does not blink

[MidlifeCRUISER]

I replaced the led blinkers with the Yamaha LED plus ones. I didn't like the delivered bulky resistors so i installed a special LED blinker relay. All the blinkers work like a charm but the indicator lights on the dash only burn solid (no blinking) when activated.

 

No blinking means my attention wanders elsewhere so i am driving around with my blinkers activated most of the time...

 

Does anyone know a fix? 

 

Greetz!

[Gpk183]

Indicators are fun aren't they....

I think you need to put a resistor on it as this guy has laid out:

 

Dash Turn Signal LED Indicator Fix - Millennail DIYer

---

On this Kawasaki Ninja, the dash indicator wouldn't blink - only glow. This DIY explains the turn signal LED indicator fix that solved it.

 

[Gezgin Endurocu]

On 3/22/2020 at 1:11 AM, MidlifeCRUISER said:

I replaced the led blinkers with the Yamaha LED plus ones. I didn't like the delivered bulky resistors so i installed a special LED blinker relay. All the blinkers work like a charm but the indicator lights on the dash only burn solid (no blinking) when activated.

 

No blinking means my attention wanders elsewhere so i am driving around with my blinkers activated most of the time...

 

Does anyone know a fix? 

 

Greetz!

Check orignal flashor ,under right rear ...if you put out it ,put it again...because you dont need any modification with yamaha leds everything must be original

[MidlifeCRUISER]

@Gezgin Endurocu Nope, if you don't want to use the resistors you need a different relay.