ACD Racing Skid Plate with aftermarket headers...

[SantacruzT100]

I purchased the @ACD Racing USA skid plate in the group buy and found out that they DON'T work with any aftermarket headers. So I went to the garage and started cutting and making my own version.  I purchased the Leo Vince headers and HP corse exhaust from @BellissiMoto along with the @2 Wheel DynoWorks ECU engine work. So I was all in with the headers.  Below are the mods I did to the ACD skid plate to make it work on my T7.  I had to move the holes a few millimeters and added an aluminum spacer from amazon (

Robot Check

)  

 

First, I removed about 2 inches of the top plate to clear the headers.  Second, I had to use these spacers to clear the headers on the front two holes.  Now there is plenty of room. 

[close range]

I had to make similar modifications to make my ACD fit with Dominator headers.

[powder]

Anyone knows the compatibility of aftermarket headers with the optional Yamaha skid plate? 

 

Particularly the Dominator but any info is good.